QRD SPARK N5 - LED Lighting Setup & Troubleshooting Guide
LED COLOR ADJUSTMENT:
QRD Spark N5 controller includes customizable RGB lighting effects (surrounding the joysticks and button backlight areas). You can manage lighting settings via the SET button. Here's how:
1. LED Lighting Control Instructions:
-
Switch Lighting Modes: While the controller is powered on, press the SET button once to cycle through 9 single-color breathing modes and one auto-cycle mode. Available colors include: blue, cyan blue, purple, yellow, red, orange, green, white, and multicolor cycle.
-
Turn Off Lighting: Long-press the SET button for 3 seconds to turn off all RGB lighting effects (note: this does not affect the front indicator light).
-
Memory Retention: The selected lighting mode is saved and will resume the same mode the next time the controller is powered on.
2. Common Issues & Troubleshooting:
-
LED Effects Not Working or Abnormal: Please update your QRD Spark N5 firmware to the latest version V3.01 via PC using a USB cable. This resolves most compatibility or display issues. Firmware and update guide:
https://qrdgame.com/blogs/software/v3-0-1-qrd-sparkn5-version-release-notes -
SET Button Not Responding or Cannot Change Lighting: Ensure the controller is powered on and properly connected. If the issue persists, try pressing the RESET button on the back of the controller for 3 seconds to restore factory settings, or contact our support team for further assistance.