TUTORIALS
-
SOCD Modes on QRD Maestro S3
QRD Maestro S3 has access to 4 SOCD Modes SOCD1 Mode: UP wins Left + Right = Neutral Up + Down = Up SOCD2 Mode: Neutral SOCD. Left + Right = Neutral... -
[QRD STELLAR T3\T5] Macro programming adjustment and clearing
[Macro Back Button Programming] Press and hold the "M" button, 4 signal lights will light up at the same time to indicate that entered the macro programming, then click the... -
[QRD STELLAR T3\T5] How to calibrate the joystick
[Calibrate on Switch] You can adjust the sensitivity and precision of the joystick by using the "Calibrate Control Sticks" option in the system settings. System Settings -> Controllers and Sensors... -
[QRD STELLAR T3\T5] Turbo speed function adjustment and clearing
[Turbo Speed Function Adjustment] Turbo and AUTO TURBO functions 1. Hold and press the "TURBO" key + click "The Button you want to set" (first click) to set Turbo function;... -
[QRD STELLART T3\T5] How to calibrate gyroscope on switch
System settings -> Controller and Sensors -> Calibrate Motion Controls -> Calibrate Controllers -
[QRD SPARK N5] Automatic Calibration
The automatic calibration of the controller upon startup. We recommend not moving any buttons or analog sticks for the first 2-3 seconds after the controller is turned on, as this... -
[QRD SPARK N5] Macro programming and clearing
[INSTRUCTIONS FOR PROGRAMMING MACRO KEYS] To record a macro press and hold “set” key on the back and N1 or N2 buttons until indicator starts flashing. Release buttons and enter... -
[QRD SPARK N5] Turbo speed function adjustment and clearing
[TURBO SPEED ADJUSTMENT] Hold down the Turbo key, push the right Joystick up to themaximum to increase, and push the right Joystick downto the maximum to decrease. The indicator light... -
[QRD SPARK N5] Resetting back to the factory settings
While controller is ON, use a small pin or needle to reach the hidden “Reset” button on back of the controller and gently press it. -
-
[QRD STELLAR T3] RGB LED's Setting
[QRD STELLAR T3] 7 Colors LED's Adjustment
1. T+R3/L3 (Single Click): Solid Color Light Long Illumination Mode with Overall Light Color Change: Press once to change the color Sequential order: Red/Yellow/Blue/Green/Purple/Orange/Pink (STELLAR T3), cycling through colors.
2. T+R3/L3 (Double Click): Breathing ModeFirst Time: 7-Color Breathing, Second Time: Turn off the light.
3. Light Brightness Adjustment: T+R3/L3 (Long Press) to increase/decrease the brightness of the controller light. Brightness levels are 30%-50%-70%-100%.4.[Stellar T3] T + "+" / "-": Adjust the individual controller light mode. Setting method is similar: Single click "+" / "-" for solid color light color change, double click "+" / "-" for breathing mode.
-
[QRD STELLAR T5] 8 Colors LED Light Setting
8 Colors LED Light Adjustment
1. T+R3/L3 (Single Click): Solid Color Light Long Illumination Mode with Overall Light Color Change: Press once to change the color Sequential order: Red/Yellow/Blue/Green/Purple/Orange/Pink/Rainbow (STELLAR T5), cycling through colors.
2. T+R3/L3 (Double Click): Breathing ModeFirst Time: 8-Color Breathing, Second Time: Turn off the light.
3. Light Brightness Adjustment: T+R3/L3 (Long Press) to increase/decrease the brightness of the controller light. Brightness levels are 30%-50%-70%-100%.