How to Set Up Headphone & Speaker Audio on QRD Spark N5 (PS4 / PS5 /PC Settings Guide)

Audio Features Supported by QRD Spark N5

QRD Spark N5 comes with a standard 3.5mm jack supporting:

Headphone Audio (All Audio Output):
When a headset is plugged into the controller, system and game audio will be redirected to the headset automatically.
Built-in Speaker Output (Controller Speaker):
If no headset is connected, the controller can output limited game or system sounds via the built-in speaker, depending on the game and system settings.
⚠️Note: This feature depends on whether the game supports controller speaker output.

How to Configure Audio Settings on Console

✅【For PS5】:

When connecting your QRD Spark N5 to the PS5 via the QRD BlackPill adapter, follow these important steps to ensure proper audio functionality through the 3.5mm headset jack:

Ensure Your QRD BlackPill Adapter is Updated to Firmware V3.05

📌 Update link:
qrdgame.com/blogs/qrd-blackpill-update/v3-05-qrd-blackpill-ps5-wireless-converter-update-notes

Go to Settings (Gear icon on top-right)

2. Navigate to Sound > Audio Output

3. Set the following:
• Output Device: Choose “Controller Headset”

• Enable Automatically Switch Output Device

• For microphone: Go to Sound > Microphone and ensure headset mic is selected

4. For Controller Speaker usage:
• Go to Primary Output Port and select “Controller Speaker”
• Also verify the game supports this feature (e.g., Astro’s Playroom, GTA V)

✅【For PS4】:

Go to Settings
Navigate to Devices > Audio Devices
Make sure these options are set:
• Output to Headphones: Select “All Audio”
• Input Device: “Controller Headset”
• Output Device: “Controller Headset”
• Adjust Microphone Level if needed

✅Pro Tips & Troubleshooting:

No sound through headset? Check that the 3.5mm jack is fully inserted and audio output is correctly routed to “Controller Headset” in system settings.
Mic not working? Some third-party or mobile earbuds may have limited compatibility. We recommend using dedicated gaming headsets.
No controller speaker audio? This depends on the game. Not all titles support outputting sounds through the controller speaker.

How to Use Audio, Microphone & Speaker Functions of QRD Spark N5 on PC (Wired or Bluetooth)

When connecting your QRD Spark N5 controller to a Windows PC via USB or Bluetooth, the 3.5mm headset jack can be used for audio output and microphone input. Below are the correct setup instructions and important notes:

1. Hardware Compatibility

The 3.5mm audio jack works in both USB wired and Bluetooth modes on Windows.
Use a TRRS (4-pole) headset with a built-in mic to enable both audio output and mic input.
Windows 10 or 11 is required with controller audio support.

2. Audio Setup Steps (Windows 10/11)

✅ Step 1: Connect the Controller

USB: Connect via USB-C cable
Bluetooth: Go to PC Bluetooth settings → Add Device → Select “Wireless Controller”

✅ Step 2: Set Audio Output

Click the taskbar volume icon
Choose: “Headphones (QRD Spark N5)” or “USB Audio Device”
Or go to: Settings > System > Sound > Output device

✅ Step 3: Set Microphone Input

Go to: Settings > System > Sound > Input device
Choose: “Microphone (QRD Spark N5)” or similar
Use “Device Properties” to test the mic input level

3. Controller Speaker Output

The built-in speaker on Spark N5 is active only when no headset is connected. Some games may route sound effects or notifications through the controller’s speaker. Notes: