Version 2.5.97.3
Firmware DownloadQRD SparkN5 V2.5.97.3 Version Release Notes
| QRD Spark N5 Version 2.5.97.3 | Download |
- Fixed an issue where sometimes automatic calibration will not remove previous wrong calibrations.
Operation:
1. Disconnect and turn off the controller.
2. Open firmware update software "QRD SparkN5 V2.5.97.3"
3. Press and hold Dpad-UP and Triangle Buttons.
4. Connect the controller via USB cable. Release Dpad-UP and Triangle Buttons.
5. Once Connected "Exit" button turns to "Update"
6. Press "Update" button to start the update and wait for operation to complete.
7. Once update is completed "PASS" message appears next to the "Update" button.
8. Close the firmware update software.
Caution: Automatic calibration feature is available immediately after the update is finished.
Be cautious to not press LS, RS, R2,L2 controls during and immediately after the update.
Wrong calibrations can be fixed simply by reconnecting the controller and rotating RS, LS 3 times,
few seconds after connecting.
- 2-5-97-3
- 2-5-97
- 2-5-89
Version 2.5.97.3
- Fixed an issue where sometimes automatic calibration will not remove previous wrong calibrations.
Version 2.5.97
- Improved analog sticks resolution for FPS games
- Fixed issues with automatic calibration
- Removed Gamepad mode as it was conflicting with PS4 mode on Bluetooth
Current available compatibility Modes:
- ->USB default: PS4 mode
|->USB optional: X-input mode - ->Bluetooth: PS4 mode
Version 2.5.89
- Reduced controller drift by lowering the circularity deviation to 0.4%, minimizing the dead zone.
- Fixed issues with certain functions not working when connecting the controller to PS3.