[QRD FERROX M5] Battery, Charging, and Power Management Guide – qrdgame

[QRD FERROX M5] Battery, Charging, and Power Management Guide

The QRD FERROX M5 is equipped with an 800mAh rechargeable lithium-ion battery, designed to provide stable wireless performance and long usage time across Xbox Series X|S, Xbox One, Nintendo Switch, and PC through its dedicated 2.4GHz USB dongle.
This guide explains how the controller manages power, how the battery warning system works, and the correct charging methods recommended to ensure battery health and long-term reliability.

1. Low Battery Warning System (New in Latest Firmware)

With the latest firmware update, the QRD FERROX M5 now includes an enhanced low-battery alert to help users avoid unexpected shutdowns.

QRD FERROX M5 FIRMWARE UPDATE

How the Low Battery Warning Works

  • When the battery level drops below 10%, the controller will automatically trigger a low-power alert.

  • At this stage, the controller typically remains usable for approximately 20–40 minutes, depending on vibration intensity, RGB LED usage, and gameplay load.

  • During the low-battery state, the Q-button LED indicator flashes red, signaling that the controller should be charged as soon as possible.

Recommended Action

When the red low-battery alert appears, connect the controller using a USB-C cable immediately to avoid losing connection during gameplay.

 

2. Why Xbox Consoles Cannot Display Battery Status

Unlike native Xbox wireless controllers, which connect using Microsoft’s proprietary Xbox Wireless protocol, the QRD FERROX M5 uses a dedicated 2.4GHz USB dongle for all Xbox Series X|S and Xbox One communication.

Important Behavior

Because the receiver creates a communication profile similar to a wired USB controller, the Xbox system:

  • Does not read or display the controller’s internal battery percentage

  • Will treat the controller as a device similar to a wired gamepad

  • Cannot show battery indicators in the Xbox UI or menu

This is normal and expected behavior for all third-party controllers using 2.4GHz USB dongle.

How to View Battery Status

If you need to check or ensure charging:

  • Connect the controller to any device using a USB-C cable

  • The QRD FERROX M5 supports pass-through charging, meaning:

    • It can continue using 2.4GHz wireless mode

    • While being charged simultaneously through its USB-C port

This ensures uninterrupted gameplay even during charging.

 

3. Safe Charging Guidelines for Lithium-Ion Battery Health

The QRD FERROX M5 uses a built-in 800mAh lithium-ion battery, with a rated charging requirement of 5V / 1A.
To ensure safe and optimal charging, please follow these guidelines:

✔ Use a 5V/1A USB power source

Because lithium-ion batteries are sensitive to charging voltage and current, the controller is designed specifically for 5V input and up to 1A charging current.

X High-power chargers

Do NOT use chargers exceeding standard USB power, such as:

  • Fast chargers (QC, PD, PPS, 9V/12V modes)

  • Smartphone fast-charging adapters over 5V

  • High-wattage USB power bricks

Although most fast chargers can technically fall back to 5V mode, their voltage negotiation may cause unstable charging or long-term stress to the battery.
To maximize battery lifespan, we strongly recommend using standard 5V USB power only.

✔ Recommended Charging Methods

You may safely charge the QRD FERROX M5 using:

  • USB-C cable connected to a PC

  • USB-C cable connected to an Xbox console USB port

  • Any standard 5V USB port (TV, monitor, docking station, etc.)

These sources provide clean, controlled 5V power ideal for lithium-ion battery longevity.

 

4. Additional Charging Notes and Best Practices

Continuous Use While Charging

The controller supports:

  • Playing via 2.4GHz dongle

  • While charging via USB-C at the same time

This ensures stable gameplay even at low battery levels.

Charging Time

  • Full recharge typically takes 2–3 hours, depending on remaining capacity.

  • Charging indicators may vary depending on LED mode settings.

Battery Care Tips

To maintain long-term battery health:

  • Avoid leaving the controller fully depleted for extended periods

  • Keep the controller charged regularly

  • Store the controller in a cool, dry environment

  • Disconnect from power after fully charged (optional but recommended)

Conclusion

The QRD FERROX M5 combines a high-capacity 800mAh lithium-ion battery with a robust 2.4GHz wireless architecture to deliver stable and responsive gaming performance across platforms.
By following proper charging guidelines and understanding how the battery warning system works, users can ensure the controller maintains optimal battery health and performance throughout its lifespan.